Ip Igmp Query-Max-Response-Time - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

4-5 ip igmp query-max-response-time

ip igmp query-max-response-time SECONDS
no ip igmp query-max-response-time
Syntax Description
SECONDS
Default
Command Mode
Usage Guideline
Example
Switch# configure terminal
Switch(config)# interface vlan 1
Switch(config-if)# ip igmp query-max-response-time 20
CLI Reference Guide
Use this command to configure the maximum response interval. Use the no form
of this command to set the maximum response interval to the default value.
The maximum response interval, in second. The range is 1 to 25 seconds.
10 seconds
Interface configuration mode
This command controls the interval for the respondent to respond the query message
before the device deletes the group information.
Use command show ip igmp interface to verify your setting.
Configure the maximum response interval to 20 seconds on the interface VLAN 1.
ip igmp query-max-response-time
212