Sp Mode Settings For Ieee 802.11B Wireless Lan - Ricoh B121 Service Manual

11. Transmission Speed. Press the Next button to display more settings, then
select the transmission speed for the mode: Auto, 11 Mbps, 5.5 Mbps, 2 Mbps,
1 Mbps (default: Auto). This setting should match the distance between the
closest machine or access point, depending on which mode is selected.
NOTE: For the Ad Hoc Mode, this is the distance between the machine and
the closest PC in the network. For the Infrastructure Mode, this is the
distance between the machine and the closest access point.
11 Mbps 140 m (153 yd.)
5.5 Mbps 200 m (219 yd.)
2 Mbps 270 m (295 yd.)
1 Mbps 400 m (437 yd.)
12. To initialize the wireless LAN settings, use page 2/2. Press Execute to initialize
the following settings:
• Transmission mode
• Channel
• Transmission Speed
• WEP
• SSID
• WEP Key

SP Mode Settings for IEEE 802.11b Wireless LAN

The following SP commands can be set for IEEE 802.11b
SP No. Name
5840 004 SSID
5840 006 Channel MAX
5840 007 Channel MIN
5840 011 WEP Key Select
5840 018 SSID Check
5840 020 WEP Mode
SM
IEEE1284/IEEE1394 INTERFACE
Function
Used to confirm the current SSID setting.
Sets the maximum range of the channel settings for the
country.
Sets the minimum range of the channels settings allowed
for your country.
Used to select the WEP key (Default: 00).
Used to check the SSID.
Used to display the maximum length of the string that can
be used for the WEP Key entry.
1-45 B121 Series/B259 Series