Ricoh B121 Service Manual page 146

SERVICE CALL CONDITIONS
No.
Definition
392 B TD sensor initial setting error
TD sensor initial setting is not
performed correctly.
401 B Transfer roller leak error 1
A current leak signal for the transfer
roller is detected.
A current feedback signal for the
transfer roller is not detected.
402 B Transfer roller leak error 2
A current leak signal for the transfer
roller is detected.
A current feedback signal for the
transfer roller is not detected.
500 B Main motor lock
A main motor lock signal is not
detected for more than 7 consecutive
checks (700 ms) after the main motor
starts to rotate, or the lock signal is not
detected for more than 7 consecutive
checks during rotation after the last
signal.
502 C Tray 2 lift motor malfunction (Optional Paper Tray units)
The paper lift sensor fails to activate
twice continuously after the tray lift
motor has been on for 18 seconds.
503 C Tray 3 lift motor malfunction (optional paper tray units)
The paper lift sensor fails to activate
twice continuously after the tray lift
motor has been on for 18 seconds.
504 C Tray 4 lift motor malfunction (optional two-tray paper tray unit)
The paper lift sensor fails to activate
twice continuously after the tray lift
motor has been on for 18 seconds.
B121 Series/B259 Series
Symptom
4-4
Possible Cause
• ID sensor defective
• No developer
• Drum does not turn
• Development roller does not turn
• Poor connection of the PCU
• The voltage is not applied to charge
roller
• High voltage supply board defective
• Poor connection of the PCU
• Transfer/separation unit set
incorrectly
• Transfer roller damaged
• High voltage supply board defective
• Poor connection of the PCU
• Transfer/separation unit set
incorrectly
• Transfer roller damaged
• Too much load on the drive
mechanism
• Main motor defective
• Paper lift sensor defective
• Tray lift motor defective
• Too much load on the drive
mechanism
• Poor tray lift motor connection
• Paper lift sensor defective
• Tray lift motor defective
• Too much load on the drive
mechanism
• Poor tray lift motor connection
• Paper lift sensor defective
• Tray lift motor defective
• Too much load on the drive
mechanism
• Poor tray lift motor connection
SM