Ricoh B121 Service Manual page 423

3.6 ORIGINAL SENSORS (WIDTH, LENGTH, TRAILING
EDGE)
[A]
B387R107.WMF
1. Original table (
2. Sensor platform [A] ( x 3).
3. Length sensors [B], [C] ( x 1 on each sensor)
NOTE: Replace both sensors at the same time, together with the wiring and
connectors.
4. Width sensors [D], [E], and trailing edge sensor [F] ( x 1 on each sensor)
NOTE: Replace all three sensors at the same time, together with the wiring
and connectors.
SM
ORIGINAL SENSORS (WIDTH, LENGTH, TRAILING EDGE)
[D]
1.1.2)
17
[E]
[F]
[B]
[C]
B387R108.WMF
B387