INSTALLATION
11. Attach the super G3 decal [A] as shown.
12. Install the stamp cartridge [B] into the
ADF as shown (if the ADF is installed).
13. Connect the telephone line to the "LINE"
jack.
14. Plug in the machine and turn on the
main switch.
NOTE: The copier must be connected to
a properly grounded socket
outlet.
15. Make sure that the clock (date and time)
is set.
16. Start the SP mode and input the serial number into the fax unit (SP-3-102-000).
The serial number can be found on the serial number label.
Initializing the Fax Unit
When you press the Fax key for the first time after installation, an error occurs. This
is not a functional problem. Press OK. The fax starts its initialization program.
NOTE: If another error occurs after initialization, this can be a functional problem.
B620
[A]
6
B620I108.WMF
B620I552.WMFMF
[B]
SM
MF