Ricoh B121 Service Manual page 51

4. Open the front cover [A].
5. Remove the front right cover [B]
( x 1).
6. Disconnect the connector [C].
7. Cut the front cover as shown, to make
an opening [D] for the 1-bin tray.
8. Install the 1-bin tray [E].
9. Make sure the connectors [F] are
connected firmly.
10. Fasten the screw.
11. Connect the connector [G] that you
removed in step 6.
NOTE: Make sure that the connector
is connected.
SM
ONE-BIN TRAY INSTALLATION
[C]
[F]
1-23 B121 Series/B259 Series
[D]
[B]
[A]
B621I002.WMF
[G]
[E]
B621I904.WMF