Sp9-Xxx (Etc.) - Ricoh B121 Service Manual

SP9-XXX (Etc.)

9801* DCS Debug
9801 1 Common
9801 2 IFC
9801 3 SMM
9801 4 SJM/RJM
9801 5 DSS
SM
Specifies the DCS debug output format.
bit 0: Time (Time is added on each line of logs)
bit 1: Millisecond (Millisecond is added to time.)
bit 2: Colored (Text and background is colored.)
bit 3: Return code (The return code is added at line ends.)
bit 4: Indentation (Text data is indented.)
bit 5: Not used
bit 6: Not used
bit 7: Not used
Specifies the DCS IFC module debug output.
bit 0: Client event transfer log
bit 1: UCS event transfer log
bit 2: DCS internal event (inter-module event in DCS) transfer log
bit 3: Parameter data
bit 4: Process flow log
bit 5: Detailed process flow log
bit 6: Not used
bit 7: Not used
Specifies the DCS SMM module debug output.
bit 0: SCS event transfer log
bit 1: DCS internal event (inter-module event in DCS) transfer log
bit 2: Parameter data
bit 3: Process flow log
bit 4: Detailed process flow log
bit 5: SP read-/write-related event transfer log
bit 6 SP read-/write-related event parameter log
bit 7: Not used
Specifies the DCS SJM/RJM module debug output.
bit 0: SJM: IFC/DSS event transfer log
bit 1: SJM: Parameter data
bit 2: SJM: Process flow log
bit 3: SJM: Detailed process flow log
bit 4: SJM: MCS event (RPC) log
bit 5: RJM: Event transfer log
bit 6: RJM: Parameter data
bit 7: RJM: Process flow check
Specifies the DCS DSS module debug output.
bit 0: DCS internal event (inter-module event in DCS) transfer log
bit 1: MCS/NAS (internal module) event log
bit 2: Parameter data
bit 3: Time check
bit 4: Process flow check log
bit 5: Error check
bit 6: Initial values
bit 7: Temporary check
5-71
SERVICE PROGRAM MODE
B121 Series/B259 Series