ONE-BIN TRAY INSTALLATION
1.8 ONE-BIN TRAY INSTALLATION
1.8.1 ACCESSORY CHECK
Check the quantity and condition of the accessories.
No.
1
2
3
4
1.8.2 INSTALLATION PROCEDURE
CAUTION
Unplug the machine power cord before starting the following procedure.
⇒
The One –Bin Tray cannot be installed on the B121 or B259 models.
• For the B122 and B260 models, begin this procedure at step 3.
• For the B123 and B261 models, begin this procedure at step 1.
NOTE: If a B260 or B261 model has been pre-configured at the factory to be a
scanner/printer/fax (spf) configuration, begin this procedure at step 14.
1. Remove the inverter tray [A].
2. Remove the rail [B]
(2 knob screws).
3. Remove the cover [C] (1 screw).
B121 Series/B259 Series
Description
Installation procedure
One-bin sorter
Exit tray
Tapping screw M3 x 6
[B]
1-22
Rev. 10/2005
Q'ty
1
1
1
1
[C]
[A]
B621I902.WMF
SM