Ricoh B121 Service Manual page 419

Hide thumbs Also See for B121:

Table of Contents

2.8 FREE RUN

You can use DIP switch 100 (on the DF control board) to carry out a one-sided free

1. Set bit 1 and/or bit 2 on SW100 (on the DF control board) to ON.

2. Set originals on the original table.

3. The free run starts automatically after about 2 seconds.

4. To stop the run, set SW100 bits 1 and 2 back to OFF. To ensure that the

system correctly resets, turn power off and then back on.

Free Run Process

1. Set originals on the DF table.

2. The first original sheet feeds into the DF.

3. The sensor detects the original.

4. The DF outputs the original to the exit tray.

5. Steps 2 through 4 repeat for each subsequent original sheet. When all

originals have been fed, the DF stops and waits for more.

FR: Free run

Chapters

Table of Contents

B259 B260 B261 B122 B123