Ricoh B121 Service Manual page 204

SERVICE PROGRAM MODE
5801 11 NCS
Initializes the network-control-service settings: the system defaults and interface
settings (including IP addresses), Smart Net Monitor for Administrator, Web Status
Monitor settings, and the TELNET settings.
5801 12 R-Fax
Initializes the job log in ID, Smart Net Monitor for Administrator, job history, and
local storage file numbers.
5801 14 Clear DCS Settings
5801 15 Clear UCS Settings
5802 Machine Free Run
5802 1 Starts a free run of both the scanner and the printer. Press "ON" to start; press
"OFF" to stop.
5803 Input Check
5.1.8
5804 Output Check
5.1.9
Area Selection
5807*
5807 1 Selects the display language group.
1 Japan
5 Asia
SP5-807-001 is not cleared by SP5-801-001 and SP5-998-001 (
Serial Num Input
5811*
5811 1 5.1.10
5812* Service TEL
5812 1 Service TEL (Telephone)
Use this to input the telephone number of the service representative. (The number
is displayed when a service call condition occurs.) To input a dash, press . To
delete the current telephone number, press .
5812 2 Service TEL (Facsimile)
Use this to input the fax number printed on user counter reports. To input a dash,
press . To delete the current fax number, press .
B121 Series/B259 Series
2 North America 3
6 China 7
5-44
Europe 4 Taiwan
Korea
Rev. 7/2004
5.1.7).
SM