Service Tables; Service Program Mode; Enabling And Disabling Service Program Mode; Entering The Sp Mode - Ricoh B121 Service Manual

Hide thumbs Also See for B121:

Table of Contents

3. SERVICE TABLES

Before accessing the service menu, do the following:

Confirm that there is no print data in the printer buffer (the Data In LED

must not be lit or blinking).

If there is data in the buffer, wait until all data has been printed.

Never turn off the main power switch when the power LED is lit or flashing.

To avoid damaging the hard disk or memory, press the operation power

switch to switch the power off, wait for the power LED to go off, and then

switch the main power switch off.

The main power LED (

open, while the main unit is communicating with a facsimile or the network

server, or while the machine is accessing the memory for reading or writing

1. Press the Clear Mode key.

2. Use the keypad to enter "107".

3. Hold down Clear/Stop for at least 3 seconds.

4. Enter the Service Mode.

Press the cancel key to exit from the service mode.

) lights or flashes while the platen cover or ARDF is

Select "Printer SP" to enter printer SP mode.

Select "Scanner SP" to enter scanner SP mode.

SERVICE PROGRAM MODE

Table of Contents

B259 B260 B261 B122 B123