Adjusting The First Scanner Contact Points - Ricoh B121 Service Manual

SCANNER UNIT

Adjusting the First Scanner Contact Points

[A]
[B]
[C]
[E]
B121R960.WMF
1. A(R)DF or platen cover
2. Operation panel, top rear cover (
3. Exposure glass (
4. Loosen the 2 screws [A][F].
5. Slide the 1st and 2nd scanners, or one of them, to align the following holes and
marks ( Overview):
• The adjustment holes in the first scanner
• The adjustment holes in the second scanner
• The alignment marks on the frames
6. Insert the positioning tools [D][E] through the holes and marks.
7. Check that the scanner belts [B][C][G][H] are properly set between the bracket
and the 1st scanner.
8. Tighten the screws [A][F].
9. Remove the positioning tools.
10. Reassemble the machine and check the operation.
B121 Series/B259 Series
3.3.4).
3.4.1)
3-16
[D]
[F]
[G]
[H]
SM