Ricoh B121 Service Manual page 207

5840* IEEE 802.11b
5840 4* SSID
Enters a unique ID (up to 32 characters long) to identify the device when it is
operating in an area with another wireless LAN network.
5840 6* Channel MAX
Sets the maximum number of channels available for data transmission via the
wireless LAN. The number of channels available varies according to location. The
default settings are set for the maximum end of the range for each area. Adjust the
upper 4 bits to set the maximum number of channels.
Displayed only when the option 802.11b for wireless LAN is installed.
5840 7* Channel MIN
Sets the minimum number of channels available for data transmission via the
wireless LAN. The number of channels available varies according to location. The
default settings are set for the minimum end of the range for each area. Adjust the
lower 4 bits to set the minimum number of channels.
Displayed only when the option 802.11b for wireless LAN is installed.
5840 11* WEP Key Select
Selects the WEP key. [00~11 / 00 / 1 binary]
5840 20* WEP Mode
Determines the operation mode of the WEP key.
Displayed only when the option 801.11b for wireless LAN is installed.
5842 Net File Analysis
5842 1* Specifies the output mode for debugging of each net file process. The 8th bit is
reserved. The 7th bit is the switch of debugging output for each module.
5843 Operation Panel Image Exposure
5843 1* Enables and disables the operation panel read (dump) feature. After powering on
the machine, set this option to 1 to enable this feature. To reset the machine to 0,
the machine must be turned off and on again. Selecting 0 for this option without
cycling the power off and on does not restore the default setting (0).
SM
Enter ID
JA [1~14/ 14 / 1]
NA [1~11 / 11 / 1
EU [1~13 / 13 / 1]
China, Taiwan (Same as NA)
JA [1~14 / 1 / 1]
NA [1~11 / 1 / 1
EU [1~13 / 1 / 1]
China, Taiwan (Same as NA)
00: Key #1
01: Key #2 (Reserved)
10: Key #3 (Reserved)
11: Key #4 (Reserved)
0: Max. 64-bit (10 characters)
1: Max. 128-bit (10, 26 characters)
[0: Off (disable) / 1: On (enable)]
5-47
SERVICE PROGRAM MODE
0000 0000
0000 0001
0000 0010
0000 0011
B121 Series/B259 Series