External Speaker Chime Start Time Selection - NEC Electra Elite IPK Programming Manual

Electra Elite IPK
___________________________________________________________________________________
1-7-09 External Speaker Chime Start Time
Selection
General Description
Use this Memory Block only when paging alert tone (four tones) is assigned in
Memory Block 1-7-08 (External Speaker Chime Selection). This Memory Block
specifies the delay time (in milliseconds) after an external paging code is dialed before
the paging alert tone is provided.
Display
D a t a
T i t l e
N o .
0 9 : S T A R T
T I M E
Settings
Page 1
LK 1 LK 2
000 100
Page 2
LK 1 LK 2
800 900
Programming Procedures
1 Go off-line.
K I
2 Press LK1 + LK7 +
3 Press the corresponding CO/PBX line key to change the data option.
A C
Use the following when entering data:
or
G
4 Press to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
1-7-08 External Speaker Chime Selection
___________________________________________________________________________________
Programming Manual
S e t t i n g
D a t a
= 7 0 0 | 1
D I S P L A Y
LK 3 LK 4
200 300
LK 3 LK 4
1000 1100
to access the Memory Block.
to cycle between pages, + to go from page 2 to page 1, = to go from page 1 to page 2
E
to go back on-line.
LK 5 LK 6
400 500
LK 5 LK 6
1200 1300
Document Revision 4
System Mode
PC Programming
LK 7 LK 8
600 700
The shaded
selection (in ms)
is the default.
LK 7 LK 8
1400 1500
1
Submode
7
Data No.
09
+BP
2 - 205