Configuration File; Logging Out; Command Summary; User Mode - ZyXEL Communications GS-2724 User Manual

Chapter 38 Introducing Commands

38.10.1 Configuration File

When you configure the Switch using either the CLI (Command Line Interface) or web
configurator, the settings are saved as a series of commands in a configuration file on the
Switch. You can perform the following with a configuration file:
• Back up configuration once the Switch is set up to work in your network.
• Restore configuration.
• Use the same configuration file to set all Switches (of the same model) in your network to
the same settings.
You may also edit a configuration file using a text editor.
Make sure you use valid commands. The Switch rejects configuration files with
invalid or incomplete commands.

38.10.2 Logging Out

In User or Enable mode, enter the
mode entering
logs you out of the CLI.
logout

38.11 Command Summary

The following sections summarize the commands available in the Switch together with a brief
description of each command. Commands listed in the tables are in the same order as they are
displayed in the CLI. See the related section in the User's Guide for more background
information.

38.11.1 User Mode

The following table describes the commands available for User mode.

Table 88 Command Summary: User Mode

COMMAND
help
logout
exit
history
236
exit
takes you out of the Config mode and into Enable mode and entering
exit
DESCRIPTION
Displays help information.
Exits from the CLI.
Logs out from the CLI.
Displays a list of previously command(s) that you
have executed. The Switch stores up to 256
commands in history.
or command to log out of the CLI. In Config
logout
PRIVILEG
E
0
0
0
0
GS-2724 User's Guide