Model Select; Model Call; Model Addition; Model Deletion/Model Name Change/Model Copy - FUTABA T18MZ WC Instruction Manual

This function is used to load the settings of the
desired model into the T18MZ-WC's memory.
The settings may be selected from either the
transmitter's built-in memory or a SD card/USB
memory. The name of the model stored in the
transmitter and the SD card/USB memory may be
changed. This can be very useful to tell different
models settings apart. Each model name can be as
long as 32 characters, and the model name always

Model call

Model addition

Model deletion
72
＜ Linkage Menu ＞
appears in the display screen.
The Copy function is used to copy one set of model
data into a second memory within the transmitter and
the SD card/USB memory. It may be used for getting
a head-start on setting up models with almost the
same settings (only differences need to be modi ed,
instead of entering the complete model from
scratch). Also, this function may be used to make a
backup copy of a model setup before any changes
are made.
Model name change
Model copy