Setting method
Curve setting examples
the fuselage (or the reference value).
The screens shown below are curves created by
entering the pitch angle at low, center, and high side
*For a description of the curve setting method, see the
3 points or 5 points at each condition. They were
description at the back of this manual.
created by reducing the number of points to the
3 points of low side, center, and high side. When
actually creating a curve, input the angle speci ed at
Curve
ample
Normal Curve
Idle-up 1 Curve
Idle-up 2 Curve
Hold Curve
The hovering pitch, low pitch, and high pitch trim setup screen can be called from the PIT Curve setup screen.
154
< Model Menu (Helicopter Functions) >