Model Select - FUTABA 3GR-2.4G Instruction Manual

Use this function to call a new model number, or to change a set model number, to set
new model data.The T3GR-2.4G transmitter can store the model data for ten R/C
cars.
Calling model memories of different modulation modes (HRS, PPM)
After the new model is called, signals are still output in the old model modulation
mode until the transmitter power is turned off. Before using the new modulation
mode, turn the power off and on. (See page 53 for the HRS/PPM mode selection.)
Calling the setup screen
(Initial screen)
Press "SEL" key to select the
desired function screen.

Model Select

1
(Model No. selection)
Use the (CH) button to select the Model No.
2
(Select execution)
Press the (+) and (-) buttons simultaneously for about 1 second.
3
When ending adjustment, return to the initial screen by pressing the (SEL)
button.
48
Model Select / SEL
(Setup screen)
Model number:
01 ~ 10
Model name
Press "CH" key to select the next set-
up screen.