(Common Functions) Model Select; Model Copy - FUTABA T8J FUT01004369-3 Instruction Manual

Fhss 8 channel radio system
Table of Contents

Advertisement

A LOOK AT THE RADIO'S FUNCTIONS STEP BY STEP
MODEL SELECT submenu: includes three functions that manage model memory: MODEL SELECT , MODEL COPY and MODEL
RESET . Since these functions are all related, and are all basic features used with most models, they are together in the
MODEL SELECT submenu.
NOTE: When you choose a new model in the MODEL SELECT function, if the new
model is set to a different modulation, you must cycle the transmitter power to change
screen to remind you. Please note: You are still transmitting on the other modulation
until you affect this change.
GOAL:
Select Model #3.
N O T E : T h i s i s o n e o f s e v e r a l
functions for which the radio requires
Confirm proper modulation of new
model memory.
Where next?
MODEL COPY : copies the current model data into another model memory in the transmitter. The name of the model memory
you are copying into is displayed for clarity.
Examples:
• Create a new model that is similar to one you have already programmed.
• Copy the current model data into another model memory as a backup or before experimenting with new settings.
airplane model at extreme altitudes).
MODEL SELECT : This function selects which of the 20 model memories in the
are indicated after its number. (Each model memory may be a different model
type from the other memories.)
STEPS:
Open the menu, then open MODEL
SELECT submenu.
Choose Model #3.
Close.
If SFHSS/FHSS
is set for the other receiver type. Turn the transmitter off/on to change the
modulation.
MODEL NAME the model: see p. 29.
Change MODEL TYPE (aircraft, heli): see p. 30.
Change modulation ( SFHSS or FHSS ): see p. 31.
Utilize servo REVERSE : see p. 35.
Adjust END POINTs : see p. 36.
Set up IDLE-DOWN and THR-CUT for throttle management: see p. 37, 38.
Notes:
• Any data in the model copied to will be written over and lost, including name,
type and modulation. Upon completion, it cannot be recovered.
INPUTS:
for 1 second.
if required to MODEL SELECT .
to 3 .
for 1 second.
Sure? displays.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

8j

Table of Contents