Rud To Ele; Memory Function Usage Method - FUTABA T18MZ WC Instruction Manual

This function is used when you want to mix elevator
operation with rudder operation. It is used to correct
undesirable tendencies when rudder is applied in roll
maneuvers, knife edge, etc. of acrobatic planes.
at mixing curve setting. When memory operation
items are displayed.
(For a description of the switch setting method, see
conditions (When conditions are set)
148
＜ Model Menu (Airplane/Glider Functions) ＞
(switch operation) is performed with correction
position at that time is displayed on the mixing
automatically selected as the curve type.)
(Fine tuning)
*When call switch
performing elevator correction when rudder was
curve, and operation is simultaneously set.
be sure that the memory SW is not accidentally
set to ON and incorrect mixing setting is not
applied when taxiing, starting the engine, etc.
adjustment