This is used for testing servo movement. Touch
"Moving Test" (repetition mode) or "Neutral Test"
(fixed position mode) depending on which one
shows on the screen. To get from one to the other,
simply touch the eld again, and you will move from
Servo test operation
"Moving Test" to "Neutral Test" automatically. Next
touch the "Test" on/off button to start testing your
servos. The "Neutral test" is good for finding the
neutral position of a servo horn.
WARNING
Don't set a servo test mode when the drive motor
is connected and the engine was started.
■ Inadvertent rotation of the motor or acceleration of the engine
is extremely dangerous.
< Linkage Menu >
71