Stick Adjustment; Adjustment Of The Stick Lever Angle; Adjustment Of Stick Lever Tension; Adjustment Of The Lever Length - FUTABA T18MZ WC Instruction Manual

Stick Adjustment

Adjustment of the stick lever angle

You can make ne adjustments to the angle of a stick
lever either inwards or outwards from the center
stick position.
Use the attached 1.5mm hexagonal wrench (inside
stylus) to turn the screw clockwise to adjust the stick
outwards, or counter-clockwise to tilt it inward.
Note: Be careful not to turn the screw too far counterclockwise
as it could fall out.

Adjustment of the lever length

You can adjust the length of stick levers, if you like.
It is recommended to adjust the length of the sticks
in line with your hand size.
＜ Before Use ＞
18
[How to adjust the Stick length.
1. Hold the lever head "B" and turn the lever
head "A" counter-clockwise, the lock will be
released.
2. Adjust the stick lever to the desired length by
turning lever head A.
3. Securely lock the stick lever by holding
lever head A and turning lever head B
counterclockwise.

Adjustment of Stick Lever Tension

You can adjust the tension of stick-levers.
The rubber cover in the back is removed rst.