Pit Curve/Pitch Trim - FUTABA T18MZ WC Instruction Manual

This function adjusts the pitch operation curve for
each ight condition for the optimal ight response
relative to movement of the throttle stick.
The pitch curve can be freely selected from linear operation
curve to smooth curve, and adjusted to match the curve you
want by means of the T18MZ-WC's powerful Curve Edit
Function (6 types of curves can be selected). Up to 17 points
can be set for linear or curve types. However, when using
Normal curve adjustment
Idle up curve adjustment
Note:
.
Throttle hold curve adjustment
the 3 points or 5 points speci ed to create a curve, a simple
and smooth curve can be created by selecting the curve type
and reducing the number of input points to 3 or 5, and then
entering the speci ed value at the corresponding points that
you created. A curve, a simple and smooth curve can be
created by selecting the curve type and reducing the number
of input points to 3 or 5, and then entering the speci ed value
at the corresponding points that you created.
Operation precautions
WARNING
When actually starting the engine and flying,
always set the idle up condition switch to [OFF]
and start the engine in the idling state.
＜ Model Menu (Helicopter Functions) ＞
153