Logic Switch - FUTABA T18MZ WC Instruction Manual

Logic switch

In the Logic screen, the switch selection buttons appear on both the left and right side of the display.
1.The logic selection dialogue appears when
you push the logic mode button. The 3 types
selected.
Logic combination table:
SWITCH
SW1 SW2
off off
off on
on off
on on
2. The left and right side of the switch mode
can be set to the logic switch mode as well.
In this case, a maximum of 4 switches can
be assigned to the logic switch. The left and
off status determined by the 4 switches'
combination.
In the above case, the two switches in the
174
＜ Data ＞
(Logic switch setting screen)
off off off
off on on
off on on
on on off
two switches in the right are calculated as
Caution:
1. The maximum number of the logic switch is
The error message will appear when the
exceeded logic switch is going to be selected.
then select the new logic switch.
2. The mixing on/off switch modes are
automatically assigned by single mode, not
supported the group mode.
Assigned to single mode