S.bus Servo Setting; Servo Id Number - FUTABA T18MZ WC Instruction Manual

An S.BUS servo can memorize the channel
and various settings itself. Servo setting can be
performed on the T18MZ-WC screen by wiring the
servo as shown in the gure.
Individual ID numbers are memorized for your
S.BUS servos in your T18MZ-WC. When a servo is
used (as shown at the right), the servo ID number is
automatically read by the transmitter.
If you use multiple S.BUS servos and do not want
to change the settings on all that are mounted in a
fuselage, only the desired servo in the group can be
set by entering the ID of that speci c servo.
* S9070SB cannot be arranged by T18MZ-WC.
* With S.BUS servos of use, there are a function which can
be used, and an impossible function and a display screen
changes.
(Only the function which can be used by a servo is displayed.)
Procedure for changing S.BUS servo setting
WARNING
While S.BUS servo writes, you aren't supposed
to remove a connection of a servo and turn off a
power supply of a transmitter.
*Data of S.BUS servo is damaged and breaks down.
64
＜ System Menu ＞
S.BUS servo
* After reading completion, with connection of the above
gure, if a stick is moved, the test of operation of the servo
can be operated and carried out.
Servo ID input example
Press
"42"
"87"
HUB
or Y-adapter
Receiver Battery