Setting Methods: Curve Mixing - FUTABA T18MZ WC Instruction Manual

Activating functions for only the selected
*Each time the button is touched, it toggles between
1. Touch the button of the mixing you want
to set. The mixing setup screen is displayed.
Activate the function.
button.
*Each time this button is touched, it toggles between
direction switching
is activated.
*For a description of the selection method, see
1. Touch the Master button to call the Function
menu and select the master channel.
button at the left of the master channel and
*Each time the button is touched, it toggles between
then select master channel side control.
menu and select the slave channel.
the button at the right-hand side of the slave
*Each time the button is pressed, it toggles between
button on the screen.
*When mixing includes master side trim, set the Trim
*Each time this button is pressed, it toggles between
*This is effective when the master channel is set by
Function.
*Each time this button is pressed, it toggles between
fuselage is the same but the rudder angles are
substantially different.
1. Touch the curve type selection button of the
curve type you want to use to display the
selection screen and then select the curve
you want to use.
*For a description of the curve setting method, see
1. When using the curve fine tuning function,
*For a description of the fine tuning trim setting
manual.
1. When setting the servo speed, touch the
is displayed.
*For a description of the servo speed setting method,
The mixing switch can set a delay with a different
rate at starting and stopping.
*This function is inactive when a mixing switch is not
set.
other hardware.
＜ Model Menu (Common Functions) ＞
121