This function sets the throttle cut position during an
auto rotation dive. The throttle position can also be
set to an idling position separate from the throttle cut
position. Setting of these 2 positions can be selected
by switch. This allows use for switching during
training.
Example of use
Note: When throttle hold is set to ON in the normal
condition, throttle hold acts and the throttle servo
is deactivated. Always set throttle hold to ON in
the hold condition.
Operation precautions
WARNING
When starting the engine, con rm that the idle up
condition and throttle hold condition are [OFF].
Setting method
Manual mode:
Auto mode:
Auto position setting:
Throttle Hold (Cut)
Throttle Hold (Idle):
< Model Menu (Helicopter Functions) >
159