Pit To Rud Mixing (Revolution Mixing); Normal Condition Mixing Curve; Idle Up Condition Mixing Curve - FUTABA T18MZ WC Instruction Manual

Use this mixing when you want to suppress the
reaction torque generated by main rotor pitch and
speed changes at pitch operation. Adjust so that the
nose does not move in the rudder direction.
An acceleration function which temporarily increases
the correction rate at throttle stick acceleration/
deceleration operation can be set. The mixing rate at
acceleration/deceleration can be set.
However, when a GY Series or other heading hold
gyro is used, since correction is performed by the
Setting method
<Normal condition mixing curve>
gyro, this mixing is not used. If this function is used
when the gyro operation mode is the AVCS mode,
the neutral position will change.
<Idle up condition mixing curve>
<Acceleration function setting>
＜ Model Menu (Helicopter Functions) ＞
163