Basic Operation; Battery Charging - FUTABA T18MZ WC Instruction Manual

Before charging batteries, read the "Cautions for
handling battery and battery charger" in the section
"For your safety".
Charging the transmitter LT2F3500XH lithium-
polymer battery
DANGER
The LT2F3500XH lithium-polymer battery is
for the T18MZ-WC transmitter only. Do not use
it with other devices.
Always use the included AC adapter to charge
the battery.
The charging circuit is built into the T18MZ-WC.
[Method of charging battery]
1. Turn off the transmitter power.
2. Connect the power plug of the AC adapter
to an 110V outlet.
*Don't connect AC plug to the T18MZ-WC without
connecting with a 110V outlet.
3. Open the back lid of the transmitter and insert
the plug of the AC adapter into the CHG port.
4. The charging monitor of the transmitter lights
red.
*In the case LCD screen will come on for several
seconds and then go off. It may take several
seconds for charging to start after the AC adapter
is connected.
5 . W h e n t h e b a t t e r y i s f u l l y c h a r g e d t h e
transmitter monitor will light green. Remove
the charge plug and AC adaptor.
*After using the AC adapter always disconnect the
power cord from the AC outlet.
*The time to charge a completely discharged battery
pack is approximately 2 hours 30 minutes. However,
the actual charging time may vary depending on
temperature and state of the battery.
*If the battery is improperly installed or is faulty, the
transmitter monitor will not light and the battery will
not charge.
How to charge the LiFe battery FR2F1800
(Option) for the receiver
Use the battery charger that is included in the set.
[Method of charging battery]
1. Connect the power cable of the charger to
the wall socket (AC outlet).
2. Connect the connector to the LiFe battery.
*Confirm that the red LED charging indicator lights
are on.
3. Remove the battery after the LED light turns
green.
*After completing the charge remove the battery
from the charger and remove the charger from the
wall outlet.
WARNING
The transmitter battery cannot be charged with
the receiver charger. Conversely the receiver
battery cannot be charged with the transmitter
charger.
＜ Basic Operation ＞
35