Replacing The Pci Card Cage; Removing And Replacing Pci Cards - HP Integrity rx2620 User's & Service Manual

Figure 54 Removing the PCI Cage Cover
5. Unscrew the bulkhead screw that holds the accessory card in place.
6. The PCI cards are now accessible for removal and replacement.

Replacing the PCI Card Cage

To install the PCI cage into the server:
1. Install the PCI card cover onto the PCI cage. See
2. Slide the PCI card cage into the server, and lock the cage into place by closing
the release lever. See
3. Install the top metal cover. See
4. Connect all server power, PCI, and LAN cables.

Removing and Replacing PCI Cards

The server can contain up to four PCI cards. PCI cards are located in the PCI cage.
CAUTION:
in the server at any given time, depending on the cards being used.
Maximum quantity for any I/O configuration using 337972-B21, AB287A, or A9890A
cards:
Three A9890A cards maximum and one unpopulated slot
Two 337972-B21 cards maximum and two unpopulated slots
One AB287A card maximum and three unpopulated slots
Failure to observe this caution results in server degradation or server failure.
Figure 53.
There are restrictions on the number of PCI-X cards that can be installed
Figure
"Replacing the Top Metal Cover" (page
54.
34).
61