Replacing The Power Supply - HP Integrity rx2620 User's & Service Manual

1. Remove the front bezel from the server. See
(page 35).
2. Press the power supply retaining clip to unlatch the power supply release lever.
See Figure 26
Figure 26 Releasing the Power Supply Retaining Clip
3. Press the power supply release lever and pull the power supply out of the server.
Figure 27 Removing the Power Supply

Replacing the Power Supply

To replace the power supply:
1. Remove the front bezel from the server and remove the defective power supply
if you have not already done so.
2. Open the power supply release lever on the replacement power supply and push
the power supply into place.
3. Push in and up on the power supply release lever to lock the retaining clip in
place.
and Figure 27.
"Removing the Front Bezel"
39