Introduction; Server Overview; Server Dimensions - HP Integrity rx2620 User's & Service Manual

1 Introduction

The rx2620 server is a 2-socket server based on the Itanium® processor architecture.
The server supports the following operating systems: Microsoft Windows®, HP-UX,
Linux, and OpenVMS®. The server is available in either rack-mount or pedestal
configurations. The server accommodates up to 12 DIMMs and internal peripherals
including disks and a DVD. Its high availability features include hot-swap fans, power
supplies, and hot-plug disk drives.

Server Overview

The rx2620 server chassis is a 2U Electronics Industry Association (EIA) enclosure,
which mounts in any standard 19-inch EIA rack. All external cabling connects from
the rear of the enclosure. With the server installed in the rack, service access is
enhanced by the use of chassis slides. The server has bays to accommodate 1 + 1
redundant, hot-swappable power supplies, accessible from the front of the product.
There are three low-profile hot swappable hard drives accessible from the front, and
a slim-line optical drive for a CD-R, CD-RW, DVD-R, or DVD+RW. There are N + 1
redundant, hot-swappable server fans, all clearly identified and easily accessible.
Server status indication, a power switch, server locator switch, and LED are located
in the front within the bezel. A server locator switch and LED is in the back of the
server for easy identification in the rack. See
and back views of the server.
Figure 1 rx2620 Server (front view)
Figure 2 rx2620 Server (front view with bezel removed)
Figure 3 rx2620 Server (rear view)

Server Dimensions

Table 3 shows the dimensions and weight of the server.
Figure 1, Figure 2, and Figure 3 for front
11