Removing Dimms; Installing Dimms - HP Integrity rx2620 User's & Service Manual

Figure 37 DIMM Slot Identification

Removing DIMMs

To remove DIMMs:
1. Power off the server and disconnect all cables. See
(page 27).
2. Remove the top metal cover. See
3. Identify the DIMM to be removed and push the appropriate extraction levers found
on either side of the DIMM slot outward to the open position. The DIMM ejects
from the slot.
4. Remove the DIMM from the socket. If the removed memory is functional, store
it in a static-free container for future use.

Installing DIMMs

You must load DIMMs in the correct order:
You must install DIMMs in matched quads. Two matched memory card pairs of
equal size (that is, four identical DIMMs) must be installed, one pair per memory
cell as follows:
0A, 0B and 1A, 1B must be matched pairs of equal size
2A, 2B and 3A, 3B must be matched pairs of equal size
"Powering Off the Server"
"Removing the Top Metal Cover" (page 33).
48