Shutting Down Microsoft Windows - HP Integrity rx2620 User's & Service Manual

5. After Windows begins loading, wait for the Special Administration Console (SAC)
to become available.
The SAC interface provides a text-based administration tool that is available from
the system console. For details see the SAC online help (enter ? at the SAC>
prompt).
Loading.: Windows Server 2003, Datacenter
Starting: Windows Server 2003, Datacenter
********************************************************************************
Computer is booting, SAC started and initialized.
Use the "ch -?" command for information about using channels.
Use the "?" command for general help.
SAC>
6. Exit the console and iLO MP interfaces when finished using them.
To exit the server console and return to the iLO MP Main Menu, press Ctrl+B.
To exit iLO, enter X at the Main Menu.

Shutting Down Microsoft Windows

Shut down the Windows operating system on Integrity servers by using the Start menu
or the shutdown command.
CAUTION:
restart or shutdown commands under normal circumstances.
Issuing restart or shutdown at the SAC> prompt causes the server to restart or
shutdown immediately and can result in the loss of data.
Instead use the Windows Start menu or the shutdown command to shut down
gracefully.
To shut down Windows use either of the following methods.
Choose Shut Down from the Start menu and choose either Restart or Shut
down from the pull-down menu.
The Restart menu item shuts down and restarts the server. The Shut down menu
item shuts down the server.
You can use this method when using a graphical interface to the server.
Issue the shutdown command from the Windows command line.
You can issue this command from a command prompt through the Special
Administration Console (SAC) or from any other command line.
The Windows shutdown command includes the following options:
/s
/r
/a
/t xxx
For details, see the help shutdown Windows command.
Do not shut down Windows using Special Administration Console (SAC)
Shuts down and halts (power off) the server. This is the equivalent of
Start—>Shut Down, Shut down. To power on the server, use the
iLO MP PC command.
Shuts down and restarts the server. This is the equivalent of
Start—>Shut Down, Restart.
Aborts a server shutdown.
Sets the timeout period before shutdown to xxx seconds. The timeout
period ranges from 0–600, with a default of 30.
Starting Windows...
128