HP Integrity rx2620 User's & Service Manual page 41

b. Press down on the unlock lever to unlock the drive. See
NOTE: If the drive bay is not locked, the procedure for installing additional
hard drives can be accomplished without removing the server from the rack
and it is not necessary to remove the top cover. Completion of the procedure
does not require locking the disk bay, replacing the top metal cover, or
replacing the server in the rack.
Figure 29 Unlocking and Releasing the Disk Drive
3. Squeeze inward on the colored release clip on the hard drive release lever. See
Figure 30.
Figure 30 Releasing the Disk Drive
4. Pull outward on the release lever to remove the drive from the server. See
Figure 31.
Figure 29.
41