Supported Dimm Sizes - HP Integrity rx2620 User's & Service Manual

combinations from 1 GB up to 32 GB. See Figure 37 for the DIMM slot locations on
the system board.
WARNING! Ensure that the server is powered off, and all power sources have been
disconnected from the server before removing or replacing server memory.
Voltages are present at various locations within the server when an AC power source
is connected. This voltage is present even when the main power switch is in the off
position.
Failure to observe this warning could result in personal injury or damage to equipment.
CAUTION: Observe all ESD safety precautions before attempting this procedure.
Failure to follow ESD safety precautions could result in damage to the server.

Supported DIMM Sizes

Supported DIMM sizes are 256 MB, 512 MB, 1 GB, 2 GB, and 4 GB. Memory in the
server is installed in quads. A quad of memory is a set of four matching DIMMs. Quad
sizes can differ within the server as long as all DIMMs within a quad match, unless
you are installing 4 GB DIMMs. The only set up allowed with 4 GB DIMMs is to install
eight 4 GB DIMMs. The server supports combinations from 1 GB (using 256 MB
DIMMs) to 32 GB (using eight 4 GB DIMMs). See Figure 37 for the identification of
quads.
47