Figure 33 Removing the Memory Airflow Guide
Replacing the Memory Airflow Guide
1.
Align the guides on both sides of the airflow guide with the slots on the chassis.
2.
Insert the memory airflow guide in the slots.
3.
Replace the top metal cover and reconnect all of the power cables.
Removing and Replacing the Processor Airflow Guide
The following procedures show how to remove and replace the processor airflow
guide.
Removing the Processor Airflow Guide
1.
Power off the server and disconnect all power cables. See
Server" (page
2.
Remove the top metal cover. See
3.
Remove the IDE cable and power module cables from the processor airflow guide
cable clips.
4.
Remove the main portion of the airflow guide:
a.
Hold the guide using the opening on top of the guide. See
b.
At the same time, grasp the back end of the airflow guide and lift the guide
out of the server.
27).
"Removing the Top Metal Cover" (page
"Powering Off the
33).
Figure
34.
44