Set Autoboot Timeout; Select Active Console Output Devices - HP Integrity rx2620 User's & Service Manual

VenHw(D65A6B8C-71E5-4DF0-A909-F0D2992B5AA9)
Boot0000

Set AutoBoot TimeOut

Use this option to set the amount of time the system pauses before it launches the
first item in the Boot Options list.
For example:
Set Auto Boot Timeout. Select an Option
Set Timeout Value
Delete/Disable Timeout
Help
Exit
Interrupting the timeout during the countdown stops the Boot Manager from loading
any boot options automatically. If there is no countdown set, you must select boot
options manually.
To set the auto boot timeout value, in seconds, select Set Timeout Value and
enter the desired value.
To disable the timeout function, select Delete/Disable Timeout.
NOTE: When this option is selected, the server does not automatically boot. The
server stops at the EFI boot menu and waits for user input.

Select Active Console Output Devices

Use this option to define the devices that display output from the system console.
This list includes the VGA monitor and a serial port for directing output to a terminal
emulation package.
NOTE: If you install a modem in your server, make sure you disable the modem
serial port in both the Active Console Input and Active Console Output device lists.
NOTE: Some operating systems support multiple consoles, such as a simultaneous
serial and VGA output. See your operating system documentation to determine how
many consoles are supported with your server. Multiple consoles are not supported
for HP-UX or Windows (use the Smart Setup CD to switch between COM A and iLO
on Windows servers).
For example:
Select the Console Output Device(s)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100)
* Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(VtUtf8)
Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(PcAnsi)
Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100)
* Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100+)
Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(VtUtf8)
* Acpi(HWP0002,700)/Pci(2|0)
* Indicates a currently selected device.
This menu is identical to Console Error Devices. Integrity servers do not support
different configurations for Output and Error console. For correct operation:
When changes are made to either Output or Error console menus, the identical
change must be made in both menus.
When changing serial devices, changes must be made to Output, Input, and
Error menus for proper operation.
161