Server Components; Processor; Memory; Pci Riser - HP Integrity rx2620 User's & Service Manual

Table 3 Server Dimensions
Dimensions
Rack units
Height
Width
Depth
Weight
Minimum
Maximum

Server Components

The server consists of the following components:

Processor

1.4 GHz/12 MB L3 cache dual-core processor
1.6 GHz/18 MB L3 cache dual-core processor

Memory

12 memory DIMM slots
256 MB, 512 MB, 1 GB, 2 GB, and 4 GB standard 184 pins 2.5 V DDR1, CL2,
registered, ECC
133 MHz memory bus frequency, 266 M transfers/s data, 8.5 Gb/s peak data
bandwidth
Minimum memory size of 1 GB with four 256 MB DIMMs
Maximum memory size of 32 GB with eight 4 GB DIMMs
Upgrades must be made by quads of DIMMs
DIMMs loaded by quads enable interleaved mode and chip spare

PCI Riser

Four independent PCI-X 133 MHz 64 bit, 3.3 V, 15 W slots. There is no 5 V card
or hot-plug support.
NOTE: Some 25 W cards are supported. See the Server I/O Slot Matrix on the
Hewlett Packard Enterprise website at
For more information regarding specific I/O cards, see
hpux-iocards-docs.

Internal Core I/O

Dual channel SCSI U320 interface, two internal 68-pin connectors, one 68-pin
external connector
Three internal SCSI drive 80-pin type connectors that provide drive electrical
hot-plug capability
One internal IDE connector for a slim-line optical device (CD and DVD)
Value
2U
8.6 cm (3.4 in.)
48.3 cm (19.0 in.)
67.9 cm (26.8 in.)
17.5 kg (38.6 lb.)
22.2 kg (49.0 lb.)
http://www.hpe.com
http://www.hpe.com/info/
12