Controls, Ports, And Leds; Front Panel - HP Integrity rx2620 User's & Service Manual

2 Controls, Ports, and LEDs

This chapter describes the controls, ports, and LEDs on the front and rear panels of
the server.

Front Panel

The control panel at the front of the server provides the controls and indicators
commonly used for operation. For the location and description of the front panel
controls and LEDs, see
Figure 6 Front View
Figure 7 Control Panel
Table 6 Control Panel LEDs and Switches
Name
Power On/Off
LED
Power On/Off
Button
System LED
LAN LED
Diagnostic
LEDs 1 – 4
Locator Button
and LED
Figure 6, Figure
Function
The green on/off LED illuminates when the power is on.
This button powers the server on and off. See Table 2-2 for detailed operation.
The System LED provides information about the system status. When operation is
normal, the LED is green. When there is a system warning, the LED flashes yellow.
When there is a system fault, the LED flashes red.
The LAN LED provides status information about the LAN interface. When the LAN
LED flashes, there is activity on the LAN.
The four diagnostic LEDs operate in conjunction with the system LED to provide
diagnostic information about the system.
The Locator button and LED are used to help locate this server within a rack of servers.
When the button is engaged, the blue LED illuminates and an additional blue LED on
the rear panel of the server illuminates. This function can be remotely activated.
7, Table 6, and Table
1
1
7.
21