Installing Additional Memory; Supported Dimm Sizes - HP Integrity rx1620 Maintenance Manual

Hide thumbs Also See for Integrity rx1620:

Table of Contents

Figure 12 Connecting the Power Cable

13. Reinstall the sheet metal air duct.

14. Replace the cover.

15. Verify that the newly installed processor works:

Run the info cpu command at the EFI shell prompt, or

Run cpu diag from Offline Diagnostic CD for full functional check.

Installing Additional Memory

The HP Integrity rx1620 Server has 8 memory sockets for installing DDR SDRAM memory modules.

These memory modules can either be 256MB, 512MB, 1GB, or 2GB size. The system supports

combinations from 512 MB up to 16GB.

Supported DIMM sizes are 256MB, 512MB, 1GB, 2GB. Dissimilar DIMM sizes may be used in

any available slot pairs but all DIMMs in each pair must match.

Paired DIMM slots are:

Pair 1 = DIMM Slot 0A and 0B

Pair 2 = DIMM Slot 1A and 1B

Pair 3 = DIMM Slot 3A and 3B

Pair 4 = DIMM Slot 2A and 2B

Installing Additional Memory

Table of Contents