Address Overview; What You Need To Know; Address Summary Screen - ZyXEL Communications ZyWALL 1100 User Manual

The following table describes the labels in this screen.
Table 231 Configuration > Object > Application > Application > Add Application Group Rule
LABEL
Name
Description
Member List
OK
Cancel

33.5 Address Overview

Address objects can represent a single IP address or a range of IP addresses. Address groups are
composed of address objects and other address groups.
• The Address screen
ZyWALL/USG. Use the Address Add/Edit screen to create a new address or edit an existing
one.
• Use the Address Group summary screen
Group Add/Edit screen, to maintain address groups in the ZyWALL/USG.

33.5.1 What You Need To Know

Address objects and address groups are used in dynamic routes, security policies, application
patrol, content filtering, and VPN connection policies. For example, addresses are used to specify
where content restrictions apply in content filtering. Please see the respective sections for more
information about how address objects and address groups are used in each one.
Address groups are composed of address objects and address groups. The sequence of members in
the address group is not important.

33.5.2 Address Summary Screen

The address screens are used to create, maintain, and remove addresses. There are the types of
address objects.
• HOST - a host address is defined by an IP Address.
• RANGE - a range address is defined by a Starting IP Address and an Ending IP Address.
• SUBNET - a network address is defined by a Network IP address and Netmask subnet mask.
Chapter 33 Object
DESCRIPTION
Enter a name for the group. You may use 1-31 alphanumeric characters, underscores(
or dashes (-), but the first character cannot be a number. This value is case-sensitive.
This field displays the description of each group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
The Member list displays the names of the application and application group objects that
have been added to the application group. The order of members is not important.
Select items from the Available list that you want to be members and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
(Section 33.5.2 on page
ZyWALL/USG Series User's Guide
557
557) provides a summary of all addresses in the
(Section 33.5.2.3 on page
_
560) and the Address
),