Instrument Panel - Buell 2002 P3 Service Manual

HOME

INSTRUMENT PANEL

REMOVAL
1. See Figure 2-105. Remove two mounting screws and
instrument panel.
2. Remove two screws from back of instrument panel.
3. Remove rubber boot and odometer reset switch.
4. Depress tab and remove speedometer connector [39].
NOTE
To remove speedometer, see
OMETER.
INSTALLATION
1. Install odometer reset switch to instrument panel and
install rubber boot.
2. Install connector [39] on back of speedometer.
3. Apply LOCTITE THREADLOCKER 243 (Blue) to threads
of mounting screws. Install dash with two mounting
screws. Tighten screws to 30-36 in-lbs (3-4 Nm).
2-62 2002 Buell P3: Chassis
7.25 ELECTRONIC SPEED-
a0154x2x
Screws (2)
30-36 in-lbs
(3-4 Nm)
Odometer Reset
Switch Rubber Boot
Odometer Reset
Switch
Figure 2-105. Instrument Panel
2.27
Connector [39]