HOME
SPROCKET COVER
REMOVAL
1.
See
Figure 2-96.
Remove master cylinder bolts and
spacers.
2.
Remove rear pedal bolt and move pedal assembly down-
away from support bracket.
3.
See
Figure 2-97.
Remove the three screws and washers
on sprocket cover.
4.
Slide cover free.
INSTALLATION
1.
Apply LOCTITE THREADLOCKER 243 (Blue) to threads
of three screws.
2.
Position sprocket cover and install three screws and
washers. Tighten fasteners to 30-36 in-lbs (3-4 Nm).
3.
Move pedal assembly in position and install pedal bolt.
Torque pedal bolt to 6-8 ft-lbs (8-11 Nm).
4.
Install master cylinder bolts and spacers. See
REAR BRAKE MASTER
2-56
2002 Buell P3: Chassis
2.13
CYLINDER.
7704
2
2
1.
Bolts
2.
Spacers
3.
Pedal Bolt
Figure 2-96. Master Cylinder Mounting
a0131x2x
Nylon
Washers (3)
Screws (3)
30-36 in-lbs
(3.4-4.1 Nm)
Blue Loctite
Figure 2-97. Sprocket Cover
2.22
1
1
3