Transmission Disassembly - Buell 2002 P3 Service Manual

HOME

TRANSMISSION DISASSEMBLY

CASE REMOVAL
NOTES
●
If transmission only is being serviced, do not remove fly-
wheel assembly.
●
For crankcase, flywheel or other major servicing, the fly-
wheel assembly can be removed at any time. The same
specialty tools are used.
1. See Figure 6-36. Remove transmission case. See
TRANSMISSION CASE
2. See Figure 6-36. Split crankcases in half. See
TRANSMISSION CASE.
3. Remove crankcase and transmission assembly from
engine stand.
4. See Figure 6-37. Place crankcase (3) and transmission
assembly (4) into fixture on arbor press (1).
a. Support transmission assembly on parallel supports
(5).
5. Press transmission assembly using TRANSMISSION
REMOVER (2) (Part No. B-43895-1) to remove transmis-
sion assembly from crankcase half.
6. Remove crankcase from fixture.
6-24 2002 Buell P3: Drive/Transmission
7693
6.8
6.8
Figure 6-36. Transmission Assembly
7737
5
1. Arbor Press
2. Transmission Remover (Part no. B-43985-1)
3. Crankcase
4. Transmission Assembly
5. Parallel Supports
Figure 6-37. Transmission Remover/Installer on Fixture
6.9
1
3
2
4