Instrument Panel - Buell 2005 P3 Service Manual

HOME

INSTRUMENT PANEL

REMOVAL
1. See Figure 2-113. Remove two mounting screws (1) and
instrument panel.
2. Remove two screws from back of instrument panel.
3. Remove rubber boot (2) and odometer reset switch (3).
4. Depress tab and remove speedometer connector [39].
NOTE
To remove speedometer, see
OMETER.
INSTALLATION
1. See Figure 2-113. Install odometer reset switch to instru-
ment panel and install rubber boot.
2. Install connector [39] on back of speedometer.
3. Apply LOCTITE 243 (Blue) to threads of mounting
screws. Install dash with two mounting screws. Tighten
screws to 30-36 in-lbs (3-4 Nm).
7.25 ELECTRONIC SPEED-
a0154x2x
1
2
3
4
1. Screws (2)
2. Odometer reset switch rubber boot
3. Odometer reset switch
4. Sensor, speed
5. Connector [39]
Figure 2-113. Instrument Panel
2005 Buell P3: Chassis
2.27
5
2-67