Buell 2002 P3 Service Manual page 335

HOME
• Ignition On, Sidestand Up, transmission in Neutral
• Measure Voltage At Breakout Box- Multimeter Red
Lead To LT GN/GY (Pin 5) (+) and Black Lead To
BK (Pin 6) (-).
Is voltage 0.6-0.8 VDC?.
Remove Timer Cover (See Igni-
tion Module/Cam Position Sensor
for procedure).
Crank Engine.
Is LED Flashing?
Replace Ignition Module.
3
3 Inspect ignition module for signs
of physical contact with rotor cup.
Replace rotor cup if necessary.
Harness Adapters (HD-42962)
7-8 2002 Buell P3: Electrical
YES
YES
Is Rotor Cup Rotating?
5009
Replace Ignition
3
Module.
7793
Coil
Figure 7-6. No Spark At Spark Plug
[10]
1 6
2 5
4
3
NO
Go to Next Page.
Begin at top.
Male connectors are labeled "A"
Female connectors are labeled "B"
NO
YES
Remove Gearcase Cover.
Inspect For Mechanical Failure.
Repair.
5009
Connector [10]
NOTE
NO
5005