Wheel Bearing; Washer - Buell 2002 P3 Service Manual

HOME
INSTALLATION
PART NO.
B-43933 See Figure 2-17.
installer/remover.
NOTE
Always install first bearing on primary brake disc side. If front
wheel has two brake discs, install bearing on the left side first.
1. Obtain WHEEL BEARING INSTALLER/REMOVER (Part
No. B-43933) and assemble.
a. Sparingly apply graphite lubricant to threads of
threaded rod to prolong service life and ensure
smooth operation.
b. See Figure 2-15. Place threaded rod through sup-
port plate. Insert assembly through wheel.
c. See Figure 2-16. Place the new bearing (6) on rod
(1) with lettered side outward.
d. Install pilot (5), Nice bearing (4), washer (3) and nut
(2) over rod.
2. Hold hex end of threaded rod (1) and turn nut (2) to
install bearing (6). Bearing will be fully seated when nut
can no longer be turned. Remove tool.
3. Install spacer sleeve inside wheel hub.
4. Reverse tool and install opposite side bearing.
a0204x2x
8
7
6
1
2
4
3
Parts 1-7 common to removal/installation.
Parts 8-9 used for removal only.
Parts 10-13 used for installation only.
SPECIALTY TOOL

Wheel bearing

9
10
11
5
13
Figure 2-17. Wheel Bearing Remover/Installer (Part No. B-43933)
a0202x2x
Figure 2-15. Installation Tool Support Plate
a0203x2x
1. Threaded Rod
2. Nut
3.

Washer

4. Nice Bearing
5. Pilot
6. Wheel Bearing
Figure 2-16. Installing Bearing
NO. DESCRIPTION
1 Bridge
2 Steel Ball
3 Forcing Screw
12
4 Nut
5 Washer
6 Nice Bearing
7 Lubricant
8 Collet, 3/4 in.
9 Collet, 1.0 in.
10 Pilot, 1.0 in.
11 Pilot, 3/4 in.
12 Support Plate
13 Threaded Rod
6
5
4
1 3
2
PART NO.
HD-44060-5
12547
HD-44060-4
10210
12004
RS25100-200
J-23444A
B-43993-3
B-43993-7
B-43993-8
B-43993-6
B-43993-1
280856
2002 Buell P3: Chassis 2-15