Buell 2002 P3 Service Manual page 283

HOME
TORQUE VALUES
ITEM
Battery terminal bolts
Clutch inspection cover screws
Clutch mainshaft nut
Crankcase 1/4 in. screws
Crankcase 5/16 in. screws
Engine sprocket nut
Primary cover bolts
Rear axel nut
Retention collar screw
Shift lever pinch fastener
Shifter shaft assembly locknuts
Transmission drain plug
Transmission sprocket nut
Transmission sprocket screws
6-2 2002 Buell P3: Drive/Transmission
TORQUE
60-96 in-lbs 7-11 Nm
7-9 ft-lbs 10-12 Nm
70-80 ft-lbs 95-109 Nm
180-100 in-lbs 9.0-12.4 Nm
15-19 ft-lbs 20-25 Nm
190-210 ft-lbs 258-285 Nm
100-120 in-lbs 11-14 Nm
48-52 ft-lbs 65-71 Nm
13-17 ft-lbs 18-23 Nm
12-14 ft-lbs 16-19 Nm
90-110 in-lbs 10-12 Nm
14-30 ft-lbs 19-54 Nm
See NOTES See NOTES
90-110 in-lbs 10-12 Nm
NOTES
Page 6-6
Tighten crosswise pattern, Page 6-11
LOCTITE® thread locker 262 (red), left hand threads,
Page 6-20
LOCTITE® thread locker 262 (red), Page 6-39
LOCTITE® thread locker 262 (red), Page 6-39
LOCTITE® thread locker 262 (red), Page 6-20
Follow torque sequence, Page 6-6
Page 6-9
LOCTITE® thread locker 243 (blue), Page 6-41
Page 6-6
Bottom nut first, same torque for top, Page 6-41
Remove debris from end, Page 6-10
LOCTITE® thread locker 262 (red), left hand threads,
special torque turn method, Page 6-43
Replace after 3 removals, Page 6-44