Buell 2002 P3 Service Manual page 58

HOME
5. See Figure 1-28. Remove the spring collar, lower spring
seat and spring from slider tube.
6. See Figure 1-29. Remove the fork oil by pumping the
fork leg and rod 8-10 times until the rod moves freely.
a0006xSx
1
2
3
1. Spring collar
2. Lower spring seat
Figure 1-28. Removing Sub-Assembly
3770
Figure 1-29. Pumping Fork Oil
NOTE
The recommended fork oil is hydraulic fork oil type "E".
7. Pour 9.2 oz. fork oil into fork.
8. Install lower spring seat and spring collar.
9. Coat a new O-ring with fork oil or sealing grease.
10. Install new O-ring onto spring seat.
11. See Figure 1-30. Push down on spring seat past groove
to install stopper ring. Stopper ring will lock into groove
when installed correctly.
12. See Figure 1-31. Install slider tube cap.
13. Install front forks. See 2.17 FRONT FORK.
3. Spring
3769
Figure 1-30. Compressing Spring Seat
3768
Figure 1-31. Slider Tube Cap
2002 Buell P3: Maintenance 1-25